The driving position memory system (DPMS) can automatically store the driver's seat and power mirrors positions to one of two memorized presets. Drivers can activate the system using the driving position memory switch or the remote.

Along with the seat, the power door lock settings will also be memorized based on which remote (Driver 1 or Driver 2) is used.

Turn the vehicle to the ON mode, and then move the seat to the desired position. Press the SET button on the driving position memory switch, then both of the green LED will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat position have been memorized. The LED will remain lit, unless the seat is moved from the memorized position.

After the seat position is memorized, the seat moves to the memorized position when the appropriate remote UNLOCK button is pressed and the driver's door is opened. When the seat moves to the memorized position, the green LED corresponding with that remote stays lit until the position is changed or the vehicle is turned to the OFF (LOCK) mode.

Customize settings are controlled independently between the Driver 1 and 2 remotes.

If a failure occurs related to the power supply and B-CAN inputs, the control unit detects an abnormal condition and enters a failsafe mode stopping control of the functions.