Front Door Latch Removal and Installation
1. Front Door Plastic Cover - Remove


2. Front Door Center Lower Channel - Remove
1.
Pull the glass run channel (A) away as needed.
2.
Remove the front door center lower channel (B) as needed.

3. Front Door Latch - Remove
1.
Open the cable clip (A).
2.
Remove the bolts.
3.
Driver's side: Pull and rotate the front door latch (A) to disconnect the cylinder rod (B).
4.
Pull the front door latch downward to disconnect the outer handle rod (C), and then remove the front door latch.
NOTE: Be careful not to bend the cables (D).
5.
Open the latch protector cover (A).
6.
Disconnect the inner handle cable (A) and the latch cable (B) from the front door latch (C).

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Apply multipurpose grease to the open lever clip (A).
Driver's side: Make sure the ditch (B) is within the range (C) as shown.