Hood Opener Cable Removal and Installation
1
Front
2
Rear
Front
1.
Driver's Side Front Inner Fender - Remove
1.
Remove the front inner fender as needed
.
2.
Front Bulkhead Cover - Remove
3.
Hood Latch - Remove
4.
Front Hood Opener Cable - Remove
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
Note: Take care not to kink the cable.
Rear
1.
Driver's Side Front Inner Fender - Remove
1.
Remove the front inner fender as needed
.
2.
Hood Release Handle - Remove
3.
Rear Hood Opener Cable - Remove
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE:
Align the marks (A) on the fuel fill door opener cable (B) with the clips as shown.
Take care not to kink the cable.
