Front Seat Lumbar Support Removal and Installation
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Front Seat - Remove
2.
Front Seat-Back Cover - Remove
1.
Remove the front seat-back cover as needed
.
3.
Front Seat Lumbar Support - Remove
1.
Remove the harness clips (A).
2.
Disconnect the connectors (B).
3.
Remove the screws (A).
4.
Lift up the hook (B).
5.
Push the bottom area of the front seat-back cover/pad (A) forward as needed.
6.
Move the front seat lumbar support (B) forward, and lower it.
7.
Remove the top wires (C) from the holes (D).
8.
Remove the front seat lumbar support.
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Apply multipurpose grease to the lumbar support top wires (A) where shown.
