Remove the bolt (A), the wave washer (B), and the washer (C).
3.
Slide the armrest (A) toward the left side.
4.
Remove the right pivot shaft (B) from the friction plate (C).
5.
Raise the armrest (A) to its half range of movement, and pull out the left pivot shaft (B) and the armrest pin (C) from the collar (D), and then remove the armrest.
6.
Remove the collar (A), the inner friction plate (B), and the outer friction plate (C) from the rear seat-back frame.
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
