Front Passenger's Weight Sensor Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

NOTE:
Removal of the front passenger's weight sensors must be done according to Precautions and Procedures.
Manual seat: The front passenger's weight sensor is part of the seat frame and must be replaced as an assembly.
Power seat: The front passenger's weight sensor is part of the seat rail and must be replaced as an assembly.

Manual Seat


NOTE: Wait at least 3 minutes before starting work.

Power Seat


NOTE: Wait at least 3 minutes before starting work.


SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

NOTE:
Be sure to install the harness wires so they are not pinched or interfering with other parts.
Manual seat: The front passenger's weight sensor is part of the seat frame and must be replaced as an assembly.
Power Seat: The front passenger's weight sensor is part of the seat rail and must be replaced as an assembly.

Manual Seat

4. Seat Operation - Confirm
1.
Move the front seat and the seat-back through their full ranges of movement, making sure the harness is not pinched or interfering with other parts.

7. SRS Operation - Confirm
1.
Turn the vehicle to the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.

Power Seat

4. Seat Operation - Confirm
1.
Move the front seat and the seat-back through their full ranges of movement, making sure the harness is not pinched or interfering with other parts.

7. SRS Operation - Confirm
1.
Turn the vehicle to the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.