Rear Lower Arm A Removal and Installation

NOTE:
How to read the torque specifications.
Unless otherwise indicated, illustrations used in the procedure are for AWD model.

3. Lower Arm A - Remove
NOTE:
Use new mounting bolts and nut during reassembly.
Rear lower arm A must be installed in the specified direction. An instruction is given in the area (B) shown in the figure. Follow the instruction to install rear lower arm A.

4. All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.

NOTE: Loosely install nuts and/or bolts to install the bushings, load the suspension with the vehicle’s weight, and then tighten the nuts and/or bolts to the specified torque.