Rear Lower Arm B Removal and Installation

NOTE: Unless otherwise indicated, illustrations used in the procedure are for AWD model.

4. Lower Arm B - Remove
1.
Mark the cam positions of the adjusting bolt (A) and the adjusting cam plate (C).
2.
Remove the self-locking nut (D), the adjusting cam plate, and the adjusting bolt.
3.
Remove the lower arm B.


NOTE:
How to read the torque specifications.
Unless otherwise indicated, illustrations used in the procedure are for AWD model.

1. Lower Arm B - Install
1.
Position lower arm B.
2.
Install a new adjusting bolt (A), the adjusting cam plate (C), and a new self-locking nut (D) but do not tighten it.
NOTE:
Align the cam positions of the adjusting bolt and the adjusting cam plate with the marked positions on the frame when tightening the self-locking nut.
Tighten the self-locking nut during the rear spring installation procedure.