Rear Trailing Arm Removal and Installation

NOTE:
How to read the torque specifications.
Unless otherwise indicated, illustrations used in the procedure are for AWD model.

3. Rear Wheel Speed Sensor - Remove
1.
NOTE: Do not disconnect the wheel speed sensor connector.

4. Trailing Arm - Remove

NOTE:
Use new bolts and nuts during reassembly.
Tighten the bolt side to the specified torque in the numbered sequence shown.

5. All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.

NOTE: Loosely install the nuts and/or bolts to install the bushings, load the suspension with the vehicle’s weight, and then tighten the nuts and/or bolts to the specified torque.