Rear Stabilizer Link Removal and Installation
NOTE:
How to read the torque specifications
.
1.
Vehicle - Lift
2.
Rear Wheel - Remove
3.
Stabilizer Link - Remove
2WD
2WD
1.
Remove the flange nut (A) while holding the respective joint pin (B) with a hex wrench (C).
NOTE: Use a new flange nut during reassembly.
2.
Remove the stabilizer link lower mounting bolt (D).
NOTE: Use a new bolt during reassembly.
AWD
AWD
1.
Remove the flange nuts (A) while holding the respective joint pin (B) with a hex wrench (C).
NOTE: Use new flange nuts during reassembly.
4.
All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.
