VSA Off Switch Removal, Installation, and Test
1.
Driver's Dashboard Undercover - Remove
2.
Driver's Dashboard Lower Cover - Remove
3.
VSA Off Switch - Remove
NOTE: Position of the switch is different depending on the model.
4.
All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.
1.
VSA Off Switch - Test
VSA OFF switch 4P connector (male terminals)
VSA OFF switch 5P connector (male terminals)
VSA OFF/driver's power tailgate switch 12P connector (male terminals)
VSA OFF/heated windshield wiper area switch 12P connector (male terminals)
1.
On the switch side, check for continuity between the connector terminal in each switch position according to the table.
2.
If the switch does not works as described in the table, replace the VSA OFF switch.
