EVAP System Removal and Installation

Flammable - Keep Fire Away

NOTE:
Refer to the Fuel and Emissions Systems Service Precautions before disconnecting the fuel line.
Fuel may cause flammable gas leaks and may result in fire. Keep sparks, flame and cigarettes away.
Although a numbered sequence is shown, these "*1" indicated parts are separate components. If removal or replacement of one of the components is needed, it is not necessary to remove the other.


1
EVAP Canister*1


1646_3.0_enu_15089731_7.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)


2
EVAP Canister Purge Valve*1


1646_3.0_enu_14730724_8.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)


3
FTP Sensor/EVAP Canister Vent Shut Valve


1646_3.0_enu_14790420_8.0

enu_12714524_1.0
Replace


4
EVAP Canister Drain Pipe/EVAP Canister One Way Valve*1


1646_3.0_enu_15089732_7.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)

EVAP Canister

2. Heat Shield - Remove


3. EVAP Canister - Remove


4. Bracket - Remove


5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

EVAP Canister Purge Valve

4. EVAP Canister Purge Valve - Remove


5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

FTP Sensor/EVAP Canister Vent Shut Valve

1. EVAP Canister - Remove


2. FTP Senor - Remove


3. EVAP Canister Vent Shut Valve - Remove


4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

EVAP Canister Drain Pipe/EVAP Canister One Way Valve

2. EVAP Canister Drain Pipe - Remove


3. EVAP Canister One Way Valve - Remove


4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.