Cylinder Head Inspection for Warpage
1.
Cylinder Head - Remove
2.
Cylinder Head Warpage - Inspect
1.
Check the cylinder head for warpage. Measure along the edges, and three ways across the center:
If warpage is less than 0.05 mm (0.002 in) cylinder head resurfacing is not required.
Maximum resurface limited to the cylinder head height standard as shown.
Cylinder Head Warpage
Standard (New):
0.05 mm (0.002 in) max.
Cylinder Head Height
Standard (New):
111.95?112.05 mm (4.4075?4.4114 in)
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
