Engine Oil Pressure Switch Removal, Installation, and Test

NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1


1924_3.0_enu_14741453_5.0

enu_12713377_2.0
Detailed information, notes, and precautions

1. Oil Pressure Switch - Remove

NOTE: Remove any old liquid gasket from the oil pressure switch and the switch mounting hole.


NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1


1924_3.0_enu_14741454_5.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)

1. Oil Pressure Switch - Install
1.
Apply liquid gasket (P/N 08718-0003, 08718-0004, or 08718- 0009) to the oil pressure switch threads. Install the component within 5 minutes of applying the liquid gasket.
NOTE:
Using too much liquid gasket may cause liquid gasket to enter the oil passage or the end of the oil pressure switch.
If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
2.
Install the oil pressure switch.

1. Oil Pressure Switch - Test
1.
Disconnect the connector (A).
2.
Check for continuity between the oil pressure switch terminal (B) and the engine (ground). There should be continuity with the engine stopped. There should be no continuity with the engine running.
3.
Connect the connector.