Rear Differential Oil Seal Replacement (AWD)

Rear Differential Oil Seal Replacement

Special Tools Required

Image	Description/Tool Number
	Driver Handle, 40 mm I.D. 07746-0030100

Driveshaft Side

1.	Vehicle - Lift

2.	Rear Differential Assembly - Remove

3.	Oil Seal - Remove

4.	Oil Seal - Install

Install a new oil seal (A) even and flush with the machined edge of the differential carrier assembly using the 40 mm I.D. driver handle.

5.	Rear Differential Assembly - Install

Propeller Shaft Side

1.	Vehicle - Lift

2.	Rear Differential Fluid - Drain

3.	No. 2 Propeller Shaft - Disconnect

4.	Companion Flange - Remove

5.	Oil Seal - Remove

6.	Oil Seal - Install

Install a new oil seal (A) even and flush with the rear differential oil pump cover using the 40 mm I.D. driver handle.

7.	Companion Flange - Install

8.	No. 2 Propeller Shaft - Connect

9.	Rear Differential Fluid - Refill