High Mount Brake Light Removal and Installation

NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1

3493_3.0_enu_14789690_5.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
enu_12714524_1.0
Replace
*1
High Mount Brake Light: LED
*2
Double-sided adhesive tape

2. High Mount Brake Light - Remove
NOTE : If you going to reinstall the original high mount brake light, apply adhesive primer to the areas where the new double-sided adhesive tapes (A) will be applied, then attach the new double-sided adhesive tapes to the tailgate spoiler trim (B) on the scribes (C) as shown.

Double-sided adhesive tape (A)
Thickness
1.0 mm (0.039 in)
Width
10 mm (0.39 in)
Length
300 mm (11.8 in)

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.