Steering Heater Test
NOTE: SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Driver's Airbag - Remove
2.
Steering Heater - Test
1.
Disconnect the connector.
2.
Check for continuity between the terminals according to the table. There should be continuity.
NOTE: When the steering heater temperature is 73 °F (23 °C), resistance value is 2.0
0.20 ?.
3.
If the continuity is not as specified, the steering heater (A) is faulty;
replace the steering wheel assembly
.
3.
All Remove Parts - Install
1.
Install the parts in the reverse order of removal.
0.20 ?.