Front Individual Map Light Removal, Installation, and Test

NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1
With moonroof

3546_3.0_enu_14881229_4.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
*1
Front Individual Map Light: 8 W


1
Without moonroof

3546_3.0_enu_14881230_4.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
*1
Front Individual Map Light: 8 W

1. Lens - Remove

Carefully pry off the lenses.

2. Front Individual Map Light - Remove


4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Front Individual Map Light - Test
NOTE: When doing the front individual map light test, make sure the bulbs are installed correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb(s) or the front individual map light (A).