Vanity Mirror Light Removal, Installation, and Test

NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1


enu_12713377_2.0
Detailed information, notes, and precautions
*1
Vanity Mirror Light: 14V - 1CP

1. Lens - Remove

Carefully pry off the lenses.

2. Vanity Mirror Light - Remove


3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

2. Vanity Mirror Light - Test

Type A

Type B
NOTE: When doing the vanity mirror light test, make sure the bulbs are installed correctly.
1.
Check for continuity between the terminals in each vanity mirror cover (A) position according to the table.
2.
If the continuity is not as specified, replace the bulb(s).
3.
If the continuity is still not as specified, replace the sunvisor (B).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.