Power Tailgate Pinch Sensor Removal, Installation, and Test

NOTE: The left side is as shown; the right side is similar.


1

3613_3.0_enu_14789932_9.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)

2. Power Tailgate Pinch Sensor - Remove


3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

1. Power Tailgate Pinch Sensor - Test

Left Side

Right Side
1.
Measure the resistance between the pinch sensor connector terminals No. 1 and No. 2. The resistance value should be about 5 k? when the sensor is not pressed, and less than 2 k? when pressed.
2.
If the resistance is not as specified, replace the pinch sensor.