Power Window Switch Removal, Installation, and Test

NOTE: If the power window switch is replaced, reset the power window control unit. If the original power window switch is installed, confirm that the power window works properly.


1
Driver's

3617_3.0_enu_14789938_5.0


2
Front Passenger's

3617_3.0_enu_14789939_5.0


3
Rear

3617_3.0_enu_14789940_5.0

Driver's

2. Power Window Master Switch - Remove


3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Front Passenger's

2. Front Passenger's Power Window Switch - Remove


3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Rear

2. Rear Power Window Switch - Remove


3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.


NOTE: If the power window switch is replaced, reset the power window control unit. If the original power window switch is installed, confirm that the power window works properly.

Driver's

1. Power Window Master Switch - Test

The power window master switch has a built-in control unit. Therefore it cannot be tested by itself. Go to power window master switch connector for inputs and outputs, if all the input tests prove OK, replace it.

Front Passenger's

1. Front Passenger's Power Window Switch - Test

The front passenger's power window switch has a built-in control unit. Therefore it cannot be tested by itself. Go to front passenger's power window switch connector for inputs and outputs, if all the input tests prove OK, replace it.

Rear

1. Rear Power Window Switch - Test
1.
Swap the rear power window switch with another known-good power window switch and test. If the original power window switch is faulty; replace it.