Transmission Mount Removal and Installation (1.5 L Engine)

Transmission Mount Removal and Installation

Type A

Type B

	Torque: N·m (kgf·m, lbf·ft)
	Replace

1.	Air Cleaner - Remove

2.	12 Volt Battery - Remove

3.	PCM - Remove (Type B)

4.	12 Volt Battery Base - Remove

5.	Throttle Body Inlet Pipe - Remove

6.	PCM - Remove (Type A)

7.	Engine Undercover Lid - Remove

8.	Transmission - Support

Lift and support the transmission with a jack and a wood block under the transmission.

9.	12 Volt Battery Base Bracket - Remove

10.	Ground Cable - Disconnect

11.	Transmission Mount - Remove

12.	All Removed Parts - Install

	1.	Install the parts in the reverse order of removal.
		NOTE: Do the mounts tightening procedure before tightening all of the mounts' bolts and nuts.