DTC Troubleshooting: P0134
ElectronicCircuitSchematics-button
ADInfo-button
DTC Advanced Diagnostics: P0134
SystemDescription-button
PGM-FI System Description
DTC P0134
: A/F Sensor (Sensor 1) Heater System Malfunction
NOTE:
Before you troubleshoot,
review the general troubleshooting information
.
If DTC P0135 is stored at the same time as DTC P0134, troubleshoot DTC P0135 first, then recheck for P0134.
DTC Description
Confirmed DTC
Pending DTC
P0134 A/F Sensor (Sensor 1) Heater System Malfunction
DTC (PGM-FI)
1.
Problem verification:
Problem verification
?1.
Turn the vehicle to the ON mode.
?2.
Clear the DTC with the HDS.
Clear DTC
?3.
Start the engine, and let it idle without load (in P or N) for at least 1 minute.
?4.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
P0134 A/F Sensor (Sensor 1) Heater System Malfunction
Is DTC P0134 indicated?
YES
The failure is duplicated.
Replace the A/F sensor (Sensor 1)
.?
NO
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the A/F sensor (Sensor 1), the relay circuit board (PGM-FI subrelay), and the PCM.
If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot
.?
Troubleshooting Start