DTC Troubleshooting: P2229 (2.4 L Engine) - Honda CR-V RW/RT 2017-2020

DTC Troubleshooting: P2229

DTC P2229: BARO Sensor Circuit High Voltage

NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description	Confirmed DTC	Pending DTC
P2229 BARO Sensor Circuit High Voltage

Problem verification:

Problem verification

?1.	Turn the vehicle to the ON mode.

?2.

Check the parameter(s) below with the HDS.

Signal	Threshold		Current conditions
Signal	Values	Unit	Values	Unit
BARO SENSOR	More than 4.89	V

Do the current condition(s) match the threshold?


	YES

The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or substitute a known-good PCM.?


	NO

Intermittent failure, the system is OK at this time. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot.?