DTC Troubleshooting: B0050-F0
DTC B0050-F0: Driver's Seat Belt Buckle Switch Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
DTC
Freeze Frame
B0050-F0 Driver's Seat Belt Buckle Switch Malfunction
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode.

?4.
Turn the vehicle to the ON mode, then wait for a few seconds or more.

?5.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
B0050-F0 Driver's Seat Belt Buckle Switch Malfunction
    

Is DTC B0050-F0 indicated?

     
YES
     
     
     
The failure is duplicated. Go to SRS troubleshooting.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?