If there is an abnormal temperature rise in temperature of the transmission fluid temperature sensor, check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or replace the original TCM.?
14 °F (-10 °C) or higher
The transmission fluid temperature sensor is OK. Intermittent failure, the system is OK at this time. Check for poor connections and loose terminals between the transmission fluid temperature sensor and the TCM. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?
3.
Problem verification:
Problem verification
?1.
Check the parameter(s) below with the HDS.
Signal
Threshold
Current conditions
Values
Unit
Values
Unit
CVTF Temperature
110 or more
°C
230 or more
°F
Do the current condition(s) match the threshold?
YES
The failure is duplicated. Go to step 4.
NO
Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or replace the original TCM.?
4.
Transmission fluid temperature sensor check (after cool down):
Transmission fluid temperature sensor check (after cool down)
?1.
Let the engine cool until the Engine Coolant Temperature reads 122 °F (50 °C) or below with the HDS.
If there is an abnormal temperature decrease in temperature of the transmission fluid temperature sensor, check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or replace the original TCM.?
230 °F (110 °C) or below
The transmission fluid temperature sensor is OK. Intermittent failure, the system is OK at this time. Check for poor connections and loose terminals between the transmission fluid temperature sensor and the TCM. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?
