Rear Seat-Back Cover Removal and Installation
2. Rear Seat Head Restraint - Remove


3. Rear Seat Center Head Restraint - Remove (Left Seat-Back)


7. Rear Seat-Back Cover/Pad - Remove
1.
Release the seat-back cover (A) from the hooks (B).
2.
For some models: Remove the tether anchor cover (A).
3.
Left seat-back: Remove the armrest back panel (A).
4.
Left seat-back: Release the hooks (A).




Left seat-back

Right seat-back
5.
Release the hook strip (A).
6.
Unzip the seat-back cover (B).
7.
Release the hooks (C) and the hook and loop fastener (D).
8.
Remove the head restraint guides (A).
9.
Remove the seat-back cover/pad (B) from the seat-back frame (C).

8. Rear Seat-Back Frame Covers - Remove
1.
If necessary, remove the rear seat-back inner trim (A).




Outer bracket

Inner bracket

Center bracket (Left seat-back)
2.
If necessary, remove the rear seat-back outer bracket cover (A), the inner bracket cover (B), the center bracket cover (C), and the rear seat-back lower bracket covers (D).

9. Rear Seat-Back Cover - Remove
1.
Pass the retainers (A) through the slots in the seat-back pad (B).




Left seat-back

Right seat-back
2.
Remove the upholstery rings (A), and then remove the seat-back cover (B).

10. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Replace all of the upholstery rings (A) fastening the seat-back cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).