Panoramic Glass Roof Glass Position Adjustment
Front Glass

1. Panoramic Glass Front Glass Position - Check

Front

Rear

Side
1.
The roof panel (A) and the rear glass (B) should be even with the front glass roof seal (C) to within 0?1/?1 mm (0?0.04/?0.04 in) all the way around. If not, make the following adjustment.
Front:
0+1/-1 mm (0+0.04/-0.04 in)
Rear:
0+1/-1 mm (0+0.04/-0.04 in)
Side:
0+1/-1 mm (0+0.04/-0.04 in)

3. Panoramic Glass Front Glass Position - Adjust
1.
Slightly loosen the bolts.
2.
Adjust the front glass (A) up or down, and forward or rearward.
3.
Tighten all bolts securely.
4.
If necessary, repeat on the opposite side.

Rear Glass

1. Panoramic Glass Rear Glass Position - Check

Rear

Side
1.
The roof panel (A) should be even with the rear glass roof seal (B) to within 0?1/?1 mm (0?0.04/?0.04 in) all the way around. If not, make the following adjustment.
Rear:
0+1/-1 mm (0+0.04/-0.04 in)
Side:
0+1/-1 mm (0+0.04/-0.04 in)

3. Panoramic Glass Rear Glass Position - Adjust
1.
Slightly loosen the bolts.
2.
Adjust the rear glass (A) up or down, and forward or rearward.
3.
Tighten all bolts securely.
4.
If necessary, repeat on the opposite side.