Ambient Light Removal, Installation, and Test

NOTE: The ambient lights are built into the moonroof switch (with moonroof), roof console module (with panoramic glass roof), and rear individual map light (with panoramic glass roof).

Front

3. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

Rear

2. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

1. Ambient Light - Test

Front (With Moonroof)

NOTE: The ambient light (A) is built into the interior light switch (B).

1.
Check the lights according to the table.

NOTE:
When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).



2.
If the ambient light does not come on, the LED is faulty; replace the interior light switch assembly.





Front (With Panoramic Glass Roof)

NOTE: The ambient light is built into the roof console module (A).

1.
Check the lights according to the table.

NOTE:
When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).



2.
If the ambient light does not come on, the LED is faulty; replace the roof console module.





Rear

NOTE: The ambient light is built into the rear individual map light (A).

1.
Check the lights according to the table.

NOTE:
When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).



2.
If the ambient light does not come on, the LED is faulty; replace the rear individual map light.